banner



How To Change Lighting On Ducky One Keyboard

Ducky One 3 Serial DKON2161ST Mechanical Keyboard User Manual
Ducky One 3 Series DKON2161ST Mechanical Keyboard

Not-backlit

  • Blazon: Mechanical Keyboard
  • Switch: Cherry MX Switches
  • Keycap Material: PBT or ABS
  • Printing Method: Double-Shot or Laser engraved or Dye-Sublimation
  • Origin Of Production: Taiwan

Total size

  • Size: 450 x 140 ten xl mm
  • Weight: 1250g

Tenkeyless

  • Size: 370 x 140 10 40 mm
  • Weight: 950g

For more information on the specs and details of our keyboards, delight contact the distributor for your region.

Product Overview

RGB LED

  • Type: Mechanical Keyboard
  • Switch: Cherry MX RGB Switches
  • Keycap Material: PBT or ABS
  • Printing Method: Double-Shot or Light amplification by stimulated emission of radiation engraved
  • Origin Of Production: Taiwan

Full size

  • Size: 450 x 140 x 40 mm
  • Weight: 1250g

Tenkeyless

  • Size: 370 x 140 x 40 mm
  • Weight: 950g

For more information on the specs and details of our keyboards, please contact the distributor for your region.

Product Overview

RGB LED Backlit Modes

Fn+F10

Kickoff Mode: Wave way Seventh Mode: Random Reactive Mode
Second Style: Alpha Mode Setting Icon 8th Mode: Aurora Mode
Third Mode: Tetris Mode Setting Icon Ninth Fashion: Reactive Mode
4th Mode: Color Bicycle Manner Setting Icon 10th Mode: Breathe Mode
Fifth Mode: Rain Drop Manner Setting Icon Eleventh Mode: 100% Total Backlit Style
Sixth Mode: Circumvolve Ripple Manner Twelfth Way: Backlit Off
  • All above modes tin be adjusted with the following key sequence:
    • Fn + ←: Subtract speed
    • Fn + →: Increase speed
  • Agree Fn + F10 for iii seconds to turn off all backlit (including CM1 and CM2).
  • Only the backlit modes with Setting Icon can exist adjusted using the post-obit:
    • Fn + F5: Arrange Color Red (R) brightness. ten Levels.
    • Fn + F6: Accommodate Color Greenish (G) brightness. 10 Levels.
    • Fn + F7: Adjust Colour Blue (B) effulgence. 10 Levels.
    • Fn + F8: Erase Red, Light-green and Blue color setting.
    • Fn + Spacebar (Colour Palette): Activate Color Palette to brandish various different colors, press on the desired color, all the keys volition automatically change to match.

RGB LED Zone Customization Modes

Fn + F11 CM1 Cycle:
Kickoff Footstep: Plow on user's customized zone and color. 2nd Footstep: Plow off CM1.
Fn + F12 CM2 Bike:
Showtime Step: Plow on user'south customized zone and color. Second Step: Turn off CM2.
Fn + PrtSc REC1, recording CM1
Fn + Break REC2, recording CM2
CapsLock + F5 / F6 / F7 To set upward Reddish / Green / Blueish LED Color
CapsLock + F8 Erase ALL LED light
CapsLock + Spacebar Color Palette
CapsLock + ScrLk REC Over

Recording steps

Of import: Adapt to the color first, then set the individual keys to be ready to that color.

  1. Press Fn + PrtSc to record CM1, and Press Fn + Pause to record CM2.
  2. When start recording mode, CapsLock will display the electric current LED color. The color can be adjusted by hitting CapsLock + Spacebar. Subsequently setting the desired color, hitting any key on the keyboard will set up that key to the selected colour.
  3. Repeating the to a higher place steps allows the user to set unlike colors to different keys. If the key has been set, Press again to cancel the setting.
  4. To end recording, Press REC Over (CapsLock + ScrLk) part to terminate recording.
    The color of the CapsLock fundamental is the value yous set.

Notation:

  • When starting recording mode, CapsLock will brandish the concluding colour used.
  • CM1, CM2 cannot work at the same fourth dimension, under other lighting modes neither.
  • CM1 has priority over CM2.
  • CM1, CM2 can just turn on user's customized zone and color. That is, it cannot turn on the color in exhale mode.
  • Inbound the recording mode will display the previously saved setting.
  • If no changes are made within 30 seconds in the recording fashion, the recording session will cease without saving.

Display Way

Hold Fn + R_Alt + R_Ctrl for three sec

To display various LED backlit modes

  • The entire keyboard will be disabled while cycling through various RGB modes.
  • Unplug the keyboard to quit Display Mode

Annotation: Used for showcasing purposes.

Reset Back to Manufactory Defaults

  • US ANSI and Eu ISO layout: Left + Windows key + Right Windows fundamental

Notation:
Hold for 3 seconds. The keyboard's backlit will flash iii times to bespeak the keyboard have been reset.

Open up / Close Windows Function (Windows Key Lock)

While DIP 1 is ON, press and hold Fn + any Alt keys + any Windows primal for three seconds, the keyboard's backlit will flash 3 times to betoken the keyboard that accept been turned ON /OFF(The default setting is ON).

Mouse Part

Mouse function diagram

DIP Switch Functions

  • DIP Switches are on the underside of your keyboard.
  • DIP Switches are defaulted as OFF when y'all receive the keyboard.
DIP1 OFF (Default) ON
Enable Windows key Lock Function Disable Windows central Lock Function
DIP2 OFF (Default) ON
NKRO Way 6 Primal Rollover – Useful for Mac and Linux devices
DIP3 OFF (Default) ON
Ducky Vendor ID (VID) User defined VID
DIP4 OFF (Default) ON
Right Windows fundamental is default Right Windows key changes to the Menu key

Key Switch Functions

Key Switch Functions

  1. Applicable keys: Fn/Alt/Ctrl/Windows/CapsLock
  2. Operation:
    • Press Fn + Alt + k for 5 seconds.
    • Until the Esc, L_Ctrl, L_Win, L_Alt, R_Alt, R_Win, Fn, R_Ctrl, and CapsLock keys are all lighting up. The colorways are respectively pinkish, red, orange, yellow, dark-green, bluish, indigo, imperial and white.
    • Except for Esc & CapsLock fundamental, the rest of vii keys are able to switch each function and color at will. (2 keys max at the same fourth dimension)
    • Press CapsLock once will alter its own function to Fn ( turns into indigo LED color) then L_Ctrl key ( turns into cerise LED colour) in order.
    • Printing CapsLock again to resume CapsLock (it will be illuminated White for CapsLock).
    • Printing Esc key one time to save and exit.

Note :
You tin press Esc central to go out the switching office before starting information technology.

Ducky Macro V2.0

Step1. Profile Selections

Fn+ 1 Switch to profile 1 Manufactory settings (Default)
ii Switch to profile 2 Customize Macro Fundamental Features
3 = Switch to profile 3
4 Switch to profile four
5 Switch to profile 5
6 Switch to contour 6

Annotation:
In one case the profile is selected then the CapsLock or indicator lights will blink in the amount of selected profile number.

Step2. To enter Macro recording
Press and concord Fn + Alt + Tab for three seconds to enter Macro recording.
Once in recording way the CapsLock or indicator lights will flash slowly.
Step3. Press a key to beginning recording Macro
Printing on the primal you want to use to activate Macro. The central pressed will blink (Non-backlit version will non) and the CapsLock or indicator lights will flash swiftly.
Step4. Recording Macro
Enter any cardinal, and choose the Macro implementation and Record Time selection.
Step5. To go out or continuing recording
Press and hold Fn + Alt + Tab for 1 seconds to exit recording or press Fn + Alt to continue

Ducky Macro V2.0 Hotkeys Office

Macro Implementation Pick

Fn+ Q = Start to run Macro by pressing a fundamental
W Start to run Macro by pressing down the cardinal in one case until the key is being pressed again to stop.
E Outset to run Macro by holding down the keys until it is allow go.

Note:
When sending Macro output, pressing any keys volition break the ongoing Macro.

Macro Record Time Selection

Fn+ 1 = 0.02s
ii 0.1s
iii 0.2s
iv 0.4s
5 0.8s
half-dozen 1s

Note:

  • Default Marco function volition be based on the user's typing speed and record information technology.
  • Macro Open / Shortcut keys recording: Hold Fn + Ctrl for 3 sec.

Ducky Macro V2.0 Setting Section

Unable to set Macro part

Fn

Fn + ESC

Fn + F1~F12

Fn + PrtSc

Fn + ScrLk

Fn + Pause

Fn + 0~9

Fn + Ctrl

Fn + Alt

Fn + Windows

Fn + ↑ ↓ ← →

Fn + Infinite

Keys tin can exist set to Macro (US ANSI keyboard as example)

Default Layer

Default Layer

  • White keys can be set to Macro, greyness keys cannot be ready to Macro.

Fn Layer

Fn Layer

  • White keys can be set to Macro, greyness keys cannot be set to Macro.

Ducky Macro V2.0 Multimedia Function Keys

Fn + Windows Key + Keys below

A Mute M Search
B Volume up N Previous folio
C Volume down O Adjacent folio
D Play / Intermission P Mouse Left Click
E End Q Mouse Correct Click
F Next playlist R Mouse Center Click
G Previous playlist S Mouse Cursor Up
H Estimator T Mouse Cursor Downwardly
I My Computer U Mouse Cursor Left
J Browser V Mouse Cursor Right
1000 Postal service W Mouse Scroll Upwardly
50 Multimedia X Mouse Curlicue Down
Us ANSI and EU ISO layout Agree whatsoever Windows key + Spacebar for 3 seconds.
JP JIS layout Hold Windows key + Spacebar for 3 seconds.

Note :
Need to exist recorded commencement before use.

Ducky Macro V2.0 Windows Common Function Keys

Ctrl + C Re-create select item Windows + D Desktop
Ctrl + X Cut select item Windows + Thou Minimized all windows
Ctrl + Five Paste select item Windows + 50 Lock computer or change user
Ctrl + Z Undo Windows + R Open [Run] window
Ctrl + Y Redo Windows + F Search files or folders
Ctrl + Due north Open new file Windows + ↑ Maximized all windows
Ctrl + O Open current file Windows + ↓ Minimized windows
Ctrl + S Relieve file change Windows + ← Maximized window to the left side
Ctrl + P Print file Windows + → Maximized window to the right side
Alt + F4 Quit the software Windows + Dwelling Minimized all windows other than the i used
  • http://windows.microsoft.com/en-usa/windows/keyboard-shortcuts

Ducky Macro V2.0 Keyboard Push button Function Keys

Fn + Shift + Keys below
A Prompt Profile value N Backlit mode : Wave mode (Default)
B Profile ane O Backlit manner : Colour Cycle mode
C Profile 2 P Backlit mode : Rain Drop mode
D Contour 3 Q Backlit mode : Ripple manner
Due east Contour 4 R Backlit manner : Random Reactive mode
F Profile 5 S Backlit mode : Reactive mode
M Profile 6 T Backlit mode : 100% Total backlit mode
H Backlit modes switching U Backlit mode : Breathe mode
I Suit color carmine 5 Backlit way : Radar mode
J Arrange color green W Backlit mode : Backlit OFF
K Adjust color bluish 10 The key" . "on number pad (Num_.)
L Erase all value Y Number Lock
G Color Palette

Note:

  • Demand to be recorded first earlier use.

Ducky Macro Implication Diagram

Ducky Macro Implication Diagram

Ducky Macro V2.0 Prepare Up Example

Example A Configure the fundamental "Z" to "Q" output.

Steps:

  1. Concur Fn + Ctrl for 3 seconds, to enter Macro recording.
  2. Press Z, printing on the primal you desire to utilise to activate Macro.
  3. Printing Q, enter any key, and choose the Macro implantation.
  4. Fn + Ctrl / Fn + Alt, to exit recording / to continue recording more than keys

Example B Holding "Fn + A" and so blazon 「ABC」until release the key to cease ongoing output.

Steps:

  1. Hold Fn + Ctrl for three seconds, to enter Macro recording.
  2. Press Fn + A, press on the key yous want to use to activate Macro.
  3. Press A, B and C in sequence to record ongoing Macro.
  4. Press Fn + E, select implantations option.
  5. Fn + Ctrl / Fn + Alt, to exit recording / to keep recording more keys.

Instance C To set F1 as show "Desktop" (nether Windows system)

Steps:

  1. Hold Fn + Ctrl for 3 seconds, to enter Macro recording.
  2. Press F1, press on the key y'all want to utilize to actuate Macro.
  3. Hold Windows cardinal + D, enter any central, and choose the Macro implantation.
  4. Fn + Ctrl / Fn + Alt, to exit recording / to keep recording more keys.

Example D To set up F5 equally "mute book" (under Windows system)

Steps:

  1. Hold Fn + Ctrl for 3 seconds, to enter Macro recording.
  2. Press F5, press on the central you want to employ to activate Macro.
  3. Press Fn + Windows key + A, enter whatever key, and choose the Macro implantation.
  4. Fn + Ctrl / Fn + Alt, to exit recording / to keep recording more keys.

Note:

Set the Profile from Profile ii~6 earlier setting Macro.

Hot-swap

Ezoic

Set-up Instance

  1. Use key puller to pull out the key caps
    Set-up Example
  2. Use switch puller to pull out the switches
    Set-up Example
  3. Align switch pins with the holes
    Set-up Example
  4. Gently push the switch in
    Set-up Example

http://www.duckychannel.com.tw/

Documents / Resources

Source: https://manuals.plus/ducky/one-3-series-dkon2161st-mechanical-keyboard-manual

Posted by: kylefractoggen.blogspot.com

0 Response to "How To Change Lighting On Ducky One Keyboard"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel